Production facilities and potential
Progressive press Heilbronn REPZ 320 S
| Type of press : |
REPZ 320 S (pressure up to 320 t) with H frame |
| Number of lifts : |
20 - 80/min. |
| Adjusting lift : |
5/min. (so called creeping operation) |
| Lift height : |
14 - 160 mm |
| Setting of hammer-head : |
150 mm |
| Hole between shafts : |
600 mm |
| Maximum tool height : |
700 mm |
| Bed dimensions : |
2 700 mm x 1 100 mm |
| Machine power consumption : |
cca 72 kW |
Clicking on the view the photo will be displayed in a new full-size window.
| The press is supplemented by the following equipment: |
Off-winding loading device of type E 2000/400 SC GLST
- bearing capacity 5 000 kg
- conveyor width 600 mm
- inner diameter of coil 450 - 550 mm
- outer diameter of coil 1 800 mm
- off-winding ultrasonic control
|
Flattener with slide of type EVRZ 120/60/600
- conveyor width 20 - 600 mm
- conveyor thickness 0.5 - 6.0 mm
- electronic control S 7- L2-DP
- release by using hydraulics
- two-sided lubrication
- digital regulation of the whole machine
|
Progressive press Heilbronn REPZ 250 S
| Type of press : |
REPZ 250 S (pressure up to 250 t) with H frame |
| Number of lifts : |
30 - 120/min. |
| Adjusting lift : |
5/min. (so called creeping operation) |
| Lift height : |
30 - 160 mm |
| Setting of hammer-head : |
150 mm |
| Hole between shafts : |
500 mm |
| Maximum tool height : |
450 mm |
| Bed dimensions : |
2 000 mm x 1 100 mm |
| Machine power consumption : |
cca 70 kW |
Clicking on the view the photo will be displayed in a new full-size window.
| The press is supplemented by the following equipment: |
Off-winding loading device of type E 2000/400 SC GLST
- bearing capacity 2 000 kg
- conveyor width 400 mm
- inner diameter of coil 450 - 550 mm
- outer diameter of coil 1 500 mm
- off-winding ultrasonic control
|
Flattener with slide of type EVRZ 120/60/400
- conveyor width 20 - 400 mm
- conveyor thickness 0.5 - 4.0 mm
- electronic control S 7-300
- release by using hydraulics
- two-sided lubrication
- digital regulation of the whole machine
|
Production potential of company
- pressing on presses of type C pressure 10, 25, 40, 63, 100, 160 and 250t with the possibility of both manual loading as well as pressing by means of feeding
- surface finishing
- lathe-turning, grinding, drilling, riveting, degreasing, lacquering and phosphating
- material parting on table shears (2000 x 4 mm)
- lathe-turning diameter 100 x 1000 SN50B, SV-18RA, R12D
- shape lathe-turning on R5 to diameter 50
- milling on machines FA-3U, FGU-32
- flatwise grinding 150 x 400
- centre grinding "centerless" to diameter 40 BB08
- drilling and lathe-turning of holes on drills VS-32A, VS-20 and table drills of type SV-16
- riveting on rotary riveting machines from diameter 3 to diameter 10
- pressing on hydraulic presses CDC-2 (up to 2t pressure)
- manual grinding on grinders using adhered discs and belts
- polishing on felt, cloth and special discs by means of abrasive and polishing paste made by firms UNIPOL and PRAGOCHEMA
- degreasing in machines of type ROLL and VUMA using perchloryethylene (limited by weight on arm to 15kg and cage size)
- powder lacquering of max. size 600 x 800 mm
- wet lacquering of max. size 600 x 800 mm
- phosphating of steel materials of max. size 1200 x 600 x 800
- manual finishing work - assembly, packing, surface finishing etc.
